Fortiwifi 40F / GUI issues and CLI issues afrter firmware upgrade from 7.2.10 to 7.2.11

[antoniocerasuolo]

Hi,

I have a problem after the firmware was upgraded from 7.2.10 to 7.2.11. 

I'm having general GUI connection issues through HTTPS and sometimes the CLI gives connection lost as wella s the GUI itself losing conenction on firefox even after clearing the cache. There are no noticeable issues on edge browser.

does anyone know what happend? why did this new firmware screw up connection to fortigate in general?

ciao,
Antonio

[Toshi_Esumi]

I upgaded my FG40F one week ago, Wed night, to 7.2.11. So far, I haven't experienced any problem with GUI admin with Firefox, which I always use, or SSH/CLI. I'm accessing it only from the LAN side.
How are you accessing it? From LAN or over the internet? Over a tunnel?

Toshi

[dingjerry_FTNT]

Hi @antoniocerasuolo ,

Are you talking about the CLI widget in the GUI? 

If so, please try to clear the browser cache for a try.  Or try with a new browser to see whether you still have this issue or not.

[antoniocerasuolo]

hi am accessing over the LAN, but either Lan or internet the CLI is showing unconnected at times.

yes I tried to clear cache but the situation is still the same.

ciao,

Antonio

[dingjerry_FTNT]

Do you have local console access then?

[Toshi_Esumi]

Have you tried another machine with Firefox and saw the same symptom?

Toshi