Hi Team:
After several days, my users can't login via VPN as I see the box has gone into conservation mode.
Thus, I reset the WAD Process manually as I don't want to go to 7.61 as its manual.
So I'm using a script but this is not a good permanent solution.
So I do this:
diagnose test application wad 99
edit restart_wad
set interval 43200
set repeat 100
set start auto
set script 'diagnose test application wad 99'
next
end
Repeats every 24 Hours
Repeats 100 times
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello Jmor
I guess you're talking about FGT 81F/ FWF81F as there's no switches with that model number
If you need right now a 'permanent solution', why don't you consider run your boxes with a mature release , like 7.4.5 or even 7.2.10 ?
As "downgrading" firmware version is not advisable, I know that could be an extra job, a maintenance window, reconfiguration, etc, but you'll gain in better service for your users.
You don't need run the last last firmware version without check carefully Release Notes of the version.
For example, take a look on https://docs.fortinet.com/document/fortigate/7.6.0/fortios-release-notes/236526/known-issues
There' re several known warnings on wad process under certain circumstances to consider.
I hope it helps
regards
/ Abel
Hi JMOR,
Please execute these commands multiple times to check what happened to your system. If you dont' mind please send the result to me through email bhoang@fortinet.com. I will check the issue.
get sys status diag sys top-mem 100 diagnose hardware sysinfo memory diagnose hardware sysinfo shm diagnose hardware sysinfo slab diagnose sys process sock-mem diagnose hardware sysinfo conserve diagnose autoupdate versions get sys performance status (run around 5 times) get sys performance firewall statistics get sys performance firewall packet-distribution diagnose hardware sysinfo slab diagnose sys session stat diagnose hard sysinfo memory diagnose hardware sysinfo shm diagnose hardware deviceinfo disk diagnose hard sysinfo interrupts diagnose firewall statistic show diagnose firewall packet distribution diagnose test app proxyworker 4 diagnose ips session performance diagnose test application ipsmonitor 1 diagnose ips session list diagnose sys mpstat diagnose sys top 2 99 ( Run it for 15 seconds and press q to quit) diagnose sys top 2 99 (press 'm', let it run for 10 seconds, then press 'q' to quit) execute tac report diagnose debug enable diagnose test app wad 1000 diagnose wad mem report diagnose wad mem overused diagnose wad mem track diagnose wad memory workers diagnose wad memory sum diag user device stats diag debug disable |
Hi JMOR,
Raise a case with our support and our TAC team will check the reason behind the WAD process is consuming memory. The script is a temporary solution keep the device stable while our team investigate the issue. As mentioned by another member of the forum, look for mature releases. Also I suggest to always check the release notes before any upgrade.
Regards
DPadula
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1640 | |
1069 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.