Fortiswitch show devices multiple times on single port

[UnderscoresAndDashes]

I have a 6 fortiswitches managed by fortilink that all show the same device info for each port multiple times. I have no idea what is causing this. This site is having multiple issues and my logs show nothing unusual. Any help or suggestions would be greatly appreciated. 

[knagaraju · Accepted solution]

Hello UnderscoresAndDashes,

I think this is a GUI issue,Could you please check the mac-address learned on the switch ports
diag switch mac-address list | grep portx

if the mac-address readings are correct, then this should be GUI issue I guess.

Regards
Nagaraju

[knagaraju · Accepted solution]

Hello UnderscoresAndDashes,

I think this is a GUI issue,Could you please check the mac-address learned on the switch ports
diag switch mac-address list | grep portx

if the mac-address readings are correct, then this should be GUI issue I guess.

Regards
Nagaraju

[ebilcari · Accepted solution]

Since the switches are running in FortiLink mode maybe the command output from FGT will have a better view for this:

# diagnose switch-controller switch-info mac-table S108E... | grep port2

[UnderscoresAndDashes]

Thank you both. GUI issue seems to be the case. 

[plsikk]

Hi, Same for me, already updated FG to 7.2.7 and switch to 7.2.4 and when I moved host between vlans on the same port then is showed twice in my case. but in cli is only one time.

I think we can report this as bug in GUI