Hi All,
I have a Fortiswitch 108f connected and authorized on a Fortigate 40f.
Initially I could see all the ports no problem.
After a bit of mucking around I performed a factory reset on the gate. Initially the switch ports stopped displaying occasionally but now they wont display at all. I can see them on the graphic but if I click on the port the screen to the right comes up ("Fortiswitch Ports" but its empty. If I click the "Fortiswitch Ports" from the Menu on the left - same thing - no ports are showing.
Any ideas out there?
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Whats the FGT and FSW version?
Do you also set the switch to factory defaults?
FCNSA 5, FCNSP 5, NSE 4
Yes, I have done a reset on the switch. Both Manually with the hardware reset and via the Gate Switch Manager. Same result.
Whats the FGT and FSW version?
The Gate is FortiOS v6.0.10 build 6811
The Switch is 6.4.6 Build 5895.210325
Hey Sachit, your question got me thinking so I updated the gate to the same firmware (6.4.6) as the switch and everything is working as it should. I was being lazy as the setup is just for a lab that I will be blowing away and starting again so lesson learned. Thanks for the question.
Have a great day.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1547 | |
1031 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.