Hello expert.
i Humbly request some guidance.
I have a fortigate 80F and tried connected to manage the fortiswitch 524D via fortilink
but the following error "offline" (see screen shots)
I have included a two screen shots for clarity.
Regards
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Created on 03-10-2022 07:47 AM Edited on 03-10-2022 07:48 AM
Hello Steffen,
I update the switch as per compatibility matrix and deauthorize with clean wipe the switch.
I repeated the authorization process again and it is still showing offline as per screen shot.
I refer to the kb article as per your post from the debugging the following error was displayed
daemon: wait for event up to 0s:240000us
361s:891ms:985us flp_event_handler[734]:node: internal1 received event 110 state FL_STATE_READY switchname flags 0x124a
361s:892ms:55us flps_fsm_transition[148]:node: internal1(peer:S524DN5019000072 owner:S524DN5019000072) | state: 2 | event: 110
Unsure what is next step to resolve the offline issue.
Regards
Dear Jomof,
it may be, that the FortiSwitch OS is not compatible to your actual FortiOS for the Fortilink - please refer to the attached compatibility matrix :
https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/d756e8a9-6d2d-11e9-81a4-005056...
In case these are compatible, please refer to the following KB article to check the connection between both devices.
https://community.fortinet.com/t5/FortiSwitch/Technical-Tip-No-authorisation-between-FortiSwitch-and...
Best Steffen
Created on 03-10-2022 07:47 AM Edited on 03-10-2022 07:48 AM
Hello Steffen,
I update the switch as per compatibility matrix and deauthorize with clean wipe the switch.
I repeated the authorization process again and it is still showing offline as per screen shot.
I refer to the kb article as per your post from the debugging the following error was displayed
daemon: wait for event up to 0s:240000us
361s:891ms:985us flp_event_handler[734]:node: internal1 received event 110 state FL_STATE_READY switchname flags 0x124a
361s:892ms:55us flps_fsm_transition[148]:node: internal1(peer:S524DN5019000072 owner:S524DN5019000072) | state: 2 | event: 110
Unsure what is next step to resolve the offline issue.
Regards
Dear Jomof,
it might need to check with configuration of Switch and Fortigate, so it might be better to raise a TAC case with the serial number of the Fortiswitch to check this a little bit deeper.
Best, Steffen
I will open a case as suggested.
Thank you
So what happened? Having same issue with brand new switches and firewall after upgrading
Did you check and make sure NTP is working on the FortiSwitch? Time being in sync is a key requirement for the FortiGate to be able to recognize the FortiSwitch.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1696 | |
1091 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.