Fortiswitch change portmode with RADIUS

[eeckhardt]

Hi all,

how would I change the portmode with a radius vsa to stop wireless clients being authenticated by a Fortiswitch after an access point in local bridge mode is authenticated?

Changing untagged and tagged vlans thru RADIUS vsa is already succesfully done.

thanks,

Erik

[Anthony_E]

Hello Erik,

Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.

Thanks,

[ebilcari]

As I understood you have enabled authentication on a switch port where an AP is connected and the AP get successfully authenticated. Now the users SSID traffic is bridged on the AP management VLAN and the wifi clients need to be also authenticated by the switch port policy?
Are you using RADIUS authentication on the SSID with Dynamic VLAN assignment?