- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Fortiswitch Docu
Hello Together
For the documantion for the Fortiswitch, Doucusnap is used by the customer.
The Fortiswitches are only connected to the Fortigate via Fortilink.
I can make the Fortiswitch accessible via SNMP and ping?
Solved! Go to Solution.
- Labels:
-
FortiGate
-
FortiSwitch
Created on ‎07-23-2023 06:40 AM Edited on ‎07-23-2023 06:47 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
you can choose the policy and find the button "Edit in CLI" from the GUI and set manually the outgoing interface like:
config firewall policy
edit 22
set name "xxxx"
set srcintf "port2"
set dstintf "port5" <-- in my case or "FortiLink"
If you have found a solution, please like and accept it to make it easily accessible for others.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Yes, but you have to setup up a valid IP subnet that is routable for the FortiLink interface. You also need to create a firewall policy to allow SNMP and ICMP communication to the switch from the external server.
FortiLink interface as an example:
You can also set up DHCP reservation so the IP of the switch will not change after reboots.
If you have found a solution, please like and accept it to make it easily accessible for others.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
thanks for the info.
For the firewall policy I can not select the fortilink.
or I'm just on the hiatus is possible through
Created on ‎07-23-2023 06:40 AM Edited on ‎07-23-2023 06:47 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
you can choose the policy and find the button "Edit in CLI" from the GUI and set manually the outgoing interface like:
config firewall policy
edit 22
set name "xxxx"
set srcintf "port2"
set dstintf "port5" <-- in my case or "FortiLink"
If you have found a solution, please like and accept it to make it easily accessible for others.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Super thanks a lot.
Works.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I'm glad to hear that, happy to help!
If you have found a solution, please like and accept it to make it easily accessible for others.
