Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
MORAMADAN
New Contributor III

Fortinet recommended malicious IPs or URLs, or Malware Hash source

Hello Team,

                 I am paloalto more guy and I used to utilize Paloalto's EDLs, so I wanted to ask about any Dynamic group that contains Malicious IP addresses, URLs, or domain lists that are included in the FortiOS and I can use them in my policies.

If not, what are recommeded other sources "feeds" to add as External groups as feed that I can use for more protection in my policies?

or also any  Malware Hash feeds that are valuable.

TIA                  

M.Ramadan
M.Ramadan
1 Solution
AEK
SuperUser
SuperUser

Hello Ramadan

Go to menu Policy & Objects > Internet Service Database, you find all bad IP address DBs under the "IP Reputation DB" section. You can use them in policy depending on their direction, as source, destination or both.

ISDB_IP_Reputation.png

AEK

View solution in original post

AEK
10 REPLIES 10
AEK
SuperUser
SuperUser

Hello Ramadan

Go to menu Policy & Objects > Internet Service Database, you find all bad IP address DBs under the "IP Reputation DB" section. You can use them in policy depending on their direction, as source, destination or both.

ISDB_IP_Reputation.png

AEK
AEK
MORAMADAN
New Contributor III

Thank you, Good information and good groups, Do you recommend Blocking them all?

Surre I will keep monitoring in the beggining.

M.Ramadan
M.Ramadan
AEK

Yes, I deny them all for outgoing traffic and for incoming traffic as well when I publish some server.

For incoming traffic keep it under monitoring just in case of false positive. You know many dynamic client public IP addresses are marked bad.

AEK
AEK
MORAMADAN
New Contributor III

Very good, I applied the roles for incomming and outgoing traffic and I can see its good and will keep monitoring.

one last question, in paloalto there are almost similar groups, but I need to make sure these groups contents are exist in paloalto, is there a poosible way to reference these fortigate groups on paloalto too, I mean both exchanging their builtin groups?

 

M.Ramadan
M.Ramadan
AEK

I don't think so. The data is updated every couple of hours from FortiGuard and it needs a valid support contract on the FortiGate.

I guess it is the same for PAN.

AEK
AEK
MORAMADAN
New Contributor III

Thank you.

M.Ramadan
M.Ramadan
pdelapena

Hi everyone,

Just to supplement this information, it is now possible in FOS v7.4.4+ or v7.6.0+ to use IP Reputation Database Objects as Source Address in the Local-in Policy.

You may refer to this guide : 
https://community.fortinet.com/t5/FortiGate/Technical-Tip-IP-Reputation-Database-Objects-as-Source-A...

Best regards,
Pau
MORAMADAN
New Contributor III

Thank you

M.Ramadan
M.Ramadan
lkumar
Staff
Staff

Hello Ramadan,

Please follow the below-attached articles where you can configure the threat feeds and use it in the firewall policy

https://docs.fortinet.com/document/fortigate/6.2.0/new-features/625349/external-block-list-threat-fe...
https://docs.fortinet.com/document/fortigate/6.2.16/cookbook/9463/threat-feeds

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors