Fortinet images turn on and off in EVE-Ng

[AndreRicardo]

Hello everyone, I recently uploaded some images from Fortinet on my eve-ng, however, it turns on and seconds later it turns off, has anyone had this problem? I have other images that work from Cisco etc.

[mle2802 · Accepted solution]

hi @AndreRicardo.
Since it is the other vendor integration, I would suggest to contact Eve-ng support for more detail. I also found this document https://www.eve-ng.net/index.php/documentation/howtos/howto-add-fortinet-images/. This may be help.

[mle2802 · Accepted solution]

hi @AndreRicardo.
Since it is the other vendor integration, I would suggest to contact Eve-ng support for more detail. I also found this document https://www.eve-ng.net/index.php/documentation/howtos/howto-add-fortinet-images/. This may be help.

[AndreRicardo]

Hello, @mle2802  I ended up finding a solution on YouTube, where I needed to enable some functions that Windows wasn't letting me enable. I'll leave the video link here in case anyone also had this problem:
https://www.youtube.com/watch?v=6f1Qckg2Zx0
Thank you very much for answering me anyway with a solution, happy 2024 to you and your whole family.

[mle2802 · Accepted solution]

Hi @AndreRicardo,
I am happy to hear the solution has been found. Happy new year to you and your family as well.

Regards,
Minh

[ayoubyousri]

what is the solution ? i have the same problem when i start fortinet it stop automatically 

[ANDRES212161]

Hi Andre,

Can you please explain how that resolved the sudden shutdown of the Fortigate in EVE-NG

Tnahk you. Greetings

[shussain]

Happy 2025 to you and to your family :)

[ayoubyousri]

I did the same steps in this video but I don't know why the same problem remains

[Asadkhan]

i also face the same issue fortigate vm eve ng is off immediately after on how i can resolve i use above solution docmuemention still i face the issues

[273890]

Consegui resolver este problema habilitando , além de habilitar a virtualização na bios da placa mãe, precisa habilitar também a virtualização dentro do Virtualbox, 
Sistema > Processador > Habilitar as 2 opções existentes de virtualização.

Seguindo este video https://www.youtube.com/watch?v=QN3N9qfEAcE&t=181s aos4 minutos e 30 segundos consegui resolver. 

Intel , somente pela interface grafica, e AMD é possivel resolver somente selecionando uma opção no caminho demonstrado no video.


Importante sempre , lembrar de já ter habilitado esta opção na Bios do computador.