I was stuck on this for a while, so deciding to create a post and answering it for future Forti-newbies that experience the same issue.
On the VM Images page, you have to look carefully at the FILE INFO and choose an image that starts with FGT, and NOT FFW.
see image for clarity,
Hi vekete,
If you check the links https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-install-FortiGate-VM-on-Proxmox/ta-... , https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-install-FortiGate-KVM-in-EVE-NG/ta-... , https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-add-a-FortiGate-VM-into-the-GNS3/ta... and https://community.fortinet.com/t5/FortiGate/Technical-Tip-Install-FortiGate-VM-on-Hyper-V-and-apply/... you will noticed that all images in use starts with FGT. Basically if you follow the articles you should not get confused with FGT and FFW.
User | Count |
---|---|
1923 | |
1144 | |
769 | |
447 | |
279 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.