Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
ac1
Contributor II

Fortinet Tool

Hi everybody,

is there a tool Fortinet to configure offline any model of FortiGate?

 

thanks

ac

1 Solution
emnoc
Esteemed Contributor III

None that I'm aware of.

 

What we've done in the past to quick deploy fortios is to defined a base-cfg and install this on the usb.stick and you can boot the unit after making the changes and let teh cfg load.

 

We just modify the name, wan/lan address and install that config for the unit that's being turn up. Great if you use the same exact model of fgt.

 

We had a script that took our basic cfg and prompts for the changes and modify the values ( wan-ipv4.addr lan-ipv4.addr and default gateway , etc.....)

 

check out 

 

   https://kb.fortinet.com/kb/documentLink.do?externalID=FD46528

 

Ken Felix

 

PCNSE 

NSE 

StrongSwan  

View solution in original post

PCNSE NSE StrongSwan
2 REPLIES 2
emnoc
Esteemed Contributor III

None that I'm aware of.

 

What we've done in the past to quick deploy fortios is to defined a base-cfg and install this on the usb.stick and you can boot the unit after making the changes and let teh cfg load.

 

We just modify the name, wan/lan address and install that config for the unit that's being turn up. Great if you use the same exact model of fgt.

 

We had a script that took our basic cfg and prompts for the changes and modify the values ( wan-ipv4.addr lan-ipv4.addr and default gateway , etc.....)

 

check out 

 

   https://kb.fortinet.com/kb/documentLink.do?externalID=FD46528

 

Ken Felix

 

PCNSE 

NSE 

StrongSwan  

PCNSE NSE StrongSwan
ac1
Contributor II

Thank you for your reply

 

ac

Labels
Top Kudoed Authors