- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Fortinet Fortigate 40F configuration
Good morning,
I needed to have this information before purchasing Fortinet Fortigate 40F,
can you tell me if it has these services:
1) load balancer between the 3 servers
2) installation of an SSL certificate with intermediate CA
thanks for the support
Best regards
Alessandro
- Labels:
-
FortiGate
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Yes, it supports load balancing between servers using virtual server configuration (ref: https://docs.fortinet.com/document/fortigate/7.4.1/administration-guide/713497/virtual-server-load-b... ).
You can also install SSL certificate with intermediate CA. Is this for deep inspection?
Suraj
- Have you found a solution? Then give your helper a "Kudos" and mark the solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
a is required
CA root certificate
for the Stripe service
it will be possible ?
thanks for the replies
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
1) load balancer between the 3 servers
"- It is important to note that there is a limitation for the number of real servers which can be configured under every VIP, check for the platform and FortiOS version used, by using the command 'print tablesize' or check the Maximum Values Table portal. Look for the parameter 'firewall.vip:realservers' which will show how many real servers can be configured for every VIP object. For example for 100E and FortiOS 7.2.4, the value for 'firewall.vip:realservers' is 16 which means 16 real servers for every VIP can be configured."
In order to find 'firewall.vip:realservers' please navigate to https://docs.fortinet.com/max-value-table, specify hardware model and firmware and search for 'firewall.vip:realservers'.
2) installation of an SSL certificate with intermediate CA
It is not clear which certificate is supposed to be imported. However please find link below which you may find useful:
https://docs.fortinet.com/document/fortigate/7.4.1/administration-guide/907098/import-a-certificate
