Fortinet Firewall 10D running in transparent mode-Removing DSCP tag value

[ishu]

Firewall 100D is running in transparent mode between two network. Network A(COre LTE) Network B(Client). I see the dscp value before entring the FW but FW is removing the DSCP value and other end I see DSCP as 0x00 .   If we bypass the Firewall (remove the FW cables),Traffic works fine with dscp. I already tried enabling diff-serv forward,rev and diffre-service code command on both way policies (see below). Any suggestion to make the dscp tag packet work through transparent Firewall ? thanks   edit 3 set diffser-forward enable set diffser-rev enable set diffservcode-forward 101110 set diffservcode-rev 101110 next edit 6 set diffser-forward enable set diffser-rev enable set diffservcode-forward 101110 set diffservcode-rev 101110