hi,
we have a potential client that has a few fortinet AP's (FORTIWIFI-30D-POE v5.2.3,build670 (GA))
and they wish to integrate these AP's with a 3rd party RTLS engine. The 3rd party RTLS engine requires minimum
raw RSSI measurements from each AP of nearby detectable wifi mobile stations .
We are wondering
if the above mentioned AP software supports uploading raw RSSI measurement to a 3rd party endpoint ?
(http endpoint or at very least a TCP end point)
From the FortiOS manual we see a few mentioning to AP sniffing for rogue AP detection,
but we will require Fortinet AP to relay all detected wifi frames of associated *AND* unassociated wifi clients
nearby , not just AP's.
Is this possible, if possible, please point us to the right command
thanks!
(this (http://docs-legacy.fortin...ic_wifi_FortiAP.html#) is close to what we are looking for (RSSI for associated clients) , but we need it also for unassociated clients, for example, their probe requests)
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1712 | |
1093 | |
752 | |
447 | |
231 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.