Hi I have a problem with dedicated management port setup with my Fortinet 201E running version 7.2.2
Please can someone take a look at my problem when I am trying to setup a dedicated management port. I have an Active/ Passive setup and I would like to configure a different IP Address on each box. I would like to see on the Monitoring tool that both devices are up and not just the cluster, and also to be able to login to both Active/ Passive device.
I was configuring the dedicated management port and I keep getting the error in the screen shots that I have provided.
The setup is as follows;
Root - is not the management VDOM, the was changed to have FIREWALL-1 context as the management VDOM.
Everything is working well with the setup, except I have a reference attached to the management port, a “Sniffer” object type, I have provided screen shots,
When I follow the link that I just posted for configuring a dedicated management port, I run into an error, and I believe this could be because I have a reference attached to the mgmt port.
If I could get help with;
- Any direction on how to setup dedicated management port on each device
- How to remove the reference on the mgmt port or even reset the port
- I have attached my the port configuration in the image, and I have added the “sniffer” reference images
- I have attached the image when I am trying to configure a dedicated management port, not sure how to get around that error if it is not related to port reference
Note: I have checked the Sniffer section and this has never been used