yes i can ping the public ip
i would like to get first the best way to create the IPSEC VPN
MY SCENARIO IS i have a tunnel network range with 3 ips eg: 10.1.100.152/29 with 10.1.100.153 my network, 10.1.100.158 the asa network.
I want to get a service: http, https, 5400,5401 of the public ip of the 18.104.22.168.
i create a ipsec tunnel and my remote gateway is 10.1.100.158 i do the phase 2 with a local address ip 10.1.100.153 and the remote ip 22.214.171.124.
then i create a policy to get in to the public ip with the port:80
i have a static route with the gateway 10.1.100.158 and a destination is 126.96.36.199.
i can not get the service http .
so my question is whact is the correct way to do this job?
i can not bring up the vpn.