Fortinac

[Poseidonn]

Hello,

In Fortinac I´m trying to add an Fortinet Fabric.

I already added the Fortigate, but to add the fortiswitches do I need to have an valid Fortilink subnet (exemple 192.168.10.X)?

I need to configure SNMP in the fortiswitch too?

Thanks in advance 

[AEK · Accepted solution]

Hi Poseidonn

Never did it before but according to the FNAC-FSW integration guide you need to configure SNMP for FSW as well.

https://docs.fortinet.com/document/fortinac/9.4.0/fortiswitch-integration/762524/snmp-traps

https://docs.fortinet.com/document/fortinac/9.4.0/fortiswitch-integration/716517/snmp-link-traps-for...

Hope it helps.

[AEK · Accepted solution]

Hi Poseidonn

Never did it before but according to the FNAC-FSW integration guide you need to configure SNMP for FSW as well.

https://docs.fortinet.com/document/fortinac/9.4.0/fortiswitch-integration/762524/snmp-traps

https://docs.fortinet.com/document/fortinac/9.4.0/fortiswitch-integration/716517/snmp-link-traps-for...

Hope it helps.

[Hatibi · Accepted solution]

FortiNAC will automatically detect the FortiSwitches through FortiGate when they are in Fortilink mode.

This diagram shows how this works: https://docs.fortinet.com/document/fortinac-f/7.6.0/fortiswitch-fortilink-integration/444128/base-la...

You can also deploy FortiSwitches in Standalone mode.

In that case you can follow this guide for Integration steps with FortiNAC: https://docs.fortinet.com/document/fortinac-f/7.6.0/fortiswitch-standalone-integration/496261/fortis...

[Poseidonn]

Thanks for the help