Fortinac local radius EAP-PEAP based authentication No NT Domain was found/ Failed in EAP Select

[Jucker]

Hello,

I tried to authentication a test user with local FNAC database using dot1x EAP-PEAP and always i get this error

The allowed authentication protocols :

The client supplicant is setup correctly for EAP-PEAP(MS-CHAPv2) as inner method.

Thank you!

Regards!

@ebilcari 

[AEK]

Hi Jucker

Did you try to authenticate with this format: domain/username

[Jucker]

Hello @AEK,

I am using user locally on the FNAC, i have no domain to specify.

Regards!

[ebilcari · Accepted solution]

There was a limitation in the past that local users didn't support MSCHAPv2. In later version of FNAC it's added, more information can be found here.

[Jucker]

Hello @ebilcari ,

I will test that on one appliance running the v9.4 and let you know.

Best regards!

[ebilcari]

This feature is added starting from firmware version 9.4.4 and 7.2.3.