Fortinac Radius not enabled on device

[ipsectunnel]

Hi

I have FortiNAC version 7.4.1.0451 and Fortigate version 7.2.11. FortiAP 432F, SSID(traffic mode = tunnel) is using WPA2 ENTERPRISE and radius is selected pointing to the fortinac. 

Fortinac Winbind status is running and joined to the domain.

I get access-reject error in log. radius not enabled on device.

[ebilcari]

As a general rule, if the environment does not require the new features introduced in the newer branches, version 7.2.9 is currently the most thoroughly tested. As long as it is deployed on FNAC-OS, it can be easily upgraded to later branches when needed.

[ipsectunnel]

Thank you guys for the suggestions. I really appreciate the guidance that came without being condescending. I did the upgrade to 7.6.3 and I do not get the error any long but a new error appeared which "access deny post auth" so I checked my policies and changed some things on the Fortigate under inventory. I am able to authenticate with domain credentials and get access to the production network if the WiFi client is compliant on with the host profile.