Hello,
We have Fortimanager(FM) VM v6.2.5 with Fortianalyzer(FAZ) enabled and it has been working fine for a quite a long time. Recently we started having all sorts of trouble with it. Disabling FAZ solves the issue with FM but we need to have FAZ. Upon doing DB checks I see the following
FMG-VM64 # diagnose cdb check adom-integrity
General updating - adom FortiCarrier ... An error has occured: runtime error 0: invalid value
General updating - adom xxxx... An error has occured: runtime error 0: invalid value
General updating - adom yyyy... An error has occured: runtime error 0: invalid value
General updating - adom root ... An error has occured: runtime error 0: invalid value
General updating - adom Global ... An error has occured: runtime error 0: invalid value
If the update check returns an error, please contact Fortinet Support for assistance.
Can't find anything online on how to fix it. Updating to v6.2.9 did not resolve the problem. Any suggestions on how to fix it?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello alfortiuser,
Thank you for using the Community Forum.
I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.
Regards,
Thank you Anthony.
Hello alfortiuser,
No problem at all, I am sorry you are facing such issue and I will not stop until we do not find a solution for you :)!
May I maybe, ask you to try the version 7 of FortiManager and FortiAnalyzer?
It could help for fixing the issue.
Meanwhile, I continue to look for an answer.
Regards,
I need to address some pending changes before I can attempt to upgrade. Some additional info. The console output returns "No space left on device".
While I am not seeing any issues via cli
Filesystem 1K-blocks Used Available Use% Mounted on
rootfs 4037400 374168 3663232 9% /
none 4037412 0 4037412 0% /dev
none 7507456 0 7507456 0% /dev/shm
none 65536 20 65516 0% /tmp
/dev/sda1 503752 139392 364360 28% /data
/dev/mdvg/mdlv 397902844 26365104 371521356 7% /var
/dev/mdvg/mdlv 397902844 26365104 371521356 7% /drive0
/dev/mdvg/mdlv 397902844 26365104 371521356 7% /Storage
/dev/loop0 8887 97 8278 1% /var/dm/tcl-root
FMG-VM64 #
FMG-VM64 #
FMG-VM64 #
FMG-VM64 # execute lvm info
LVM Status: OK
LVM size: 380GB
Disk1 : Used 80GB
Disk2 : Used 300GB
Hello,
Thank you fo these informations.
I will help to find a solution.
Regards,
Hi!
So a FortiManager expert told me to process like that:
" This needs further troubleshooting
we need to open a second ssh and execute the following command
# di de app securityconsole 255
# di de en
In any case, he is inviting you to open a ticket if needed.
Regards,
Thank you. Running these commands return no output with and without FAZ enabled. And I am not able to open a ticket on FMG.
At this point we do not care about FAZ data. Can i just reinstall FMG and do restore from backup. Any special instructions?
Hello,
Ok, I will then come back to him and give you his answer.
Regards,
Hello alfortiuser,
I had an answer :):
"yes it is possible to perform a backup of the config or a snapshot on your vm and then re-install the backup or the snapshot."
Hope it will help :)!
Regards,
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1647 | |
1070 | |
751 | |
443 | |
214 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.