I want to know if there is a way to create Fortilink p2p redundancy using Fiber Link and Radio Antenna
Hi Franklin,
You may review the items below to see if this fix your issue:
For Fibre link:
- Enable FortiLink P2P on the ports connected to the fiber link on both FortiSwitch units.
- Ensure the TPID value is consistent on both ends.
config switch physical-port edit <fiber_port_name>
set fortilink-p2p enable
end
For Radio Link:
-Enable FortiLink P2P on the ports connected to the radio antenna on both FortiSwitch units.
-Ensure the TPID value is consistent on both ends.
config switch physical-port edit <radio_port_name>
set fortilink-p2p enable end
config switch physical-port
edit <fiber_port_name>
set fortilink-p2p enable
end
Thanks,
User | Count |
---|---|
2624 | |
1392 | |
804 | |
667 | |
455 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.