I have two managed Fortiswitches that I need to connect over P2P.
I am following this KB:
I believe the KB details the steps needed for unmanaged Fortiswitches. I say this as the config switch physical-port does not work when I enter the CLI on a Fortigate.
Does anyone know the required to enable P2P on two managed Fortiswitches?
Thanks.
I think the commands should be entered directly on FortiSwitch's CLI, not FortiGate.
The Fortiswitches are managed by a Fortigate. How can I enter the commands via the Fortigate CLI?
You can us ssh, or from GUI as well.
I have both Fortiswitches connected via Fortilink now. Both Fortiswitches are therefore currently hardwired to each other. Will this cause an issue when I move them to the P2P?
I didn't test it.
You should do it during off hours. You should also backup the config before you try.
What is the best way to set the CLI password on a managed Fortiswitch?
User | Count |
---|---|
2625 | |
1395 | |
810 | |
671 | |
455 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.