Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
itmaint
New Contributor

Fortigate80F FAP223E

Hello,

 

I am needing help because the Fortigate 80F v6.4.6 build6083 does not detect  two FAP-223E.

 

I  had already setup another installation time ago with the same Firewall ,firmware and  access point without any kind of issue.

 Thanks in advance

 

 

 

6 REPLIES 6
sagha
Staff
Staff

Hi itmaint, 

 

Try resetting the FAP-223E devices first and see if it works after that. This should be done using the reset option available physically on the device. 

 

Thank you. 

Shahan Agha

itmaint
New Contributor

Thanks Sagha,

 

I had already try the hard reset but it does not works.

itmaint
New Contributor

The strange is that the dhcp server (Fortigate 80F) assign the IP to the 2 FAPs , but in "Managed FortiAPs" there is nothing. 

 

sagha
Staff
Staff

Hi itmaint, 

 

Do you have following enabled under the interface? 

Under Administrative Access, select Security Fabric Connection.

 

You can also do a sniffer on FGT to check if any capwap traffic is making it to the FGT. 

 

diag sniffer packet any 'port 5246' 4 0 a

 

Thank you.

Shahan

itmaint
New Contributor

Hi,

The Security Fabric Connecion in enabled, while the diag sniffer packet any 'port 5246' 4 0 a  return

: FortiGate-80F # diag sniffer packet any 'port 5246' 4 0 a
interfaces=[any]
filters=[port 5246]
^C
0 packets received by filter
0 packets dropped by kern

itmaint
New Contributor

OK!!

I disabled the Secuity Fabric Connection , rebooted the FGT and reenabled the SFC and it works!!!!!!

 

Thanks to ALL

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors