Hello,
I am needing help because the Fortigate 80F v6.4.6 build6083 does not detect two FAP-223E.
I had already setup another installation time ago with the same Firewall ,firmware and access point without any kind of issue.
Thanks in advance
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi itmaint,
Try resetting the FAP-223E devices first and see if it works after that. This should be done using the reset option available physically on the device.
Thank you.
Shahan Agha
Thanks Sagha,
I had already try the hard reset but it does not works.
The strange is that the dhcp server (Fortigate 80F) assign the IP to the 2 FAPs , but in "Managed FortiAPs" there is nothing.
Hi itmaint,
Do you have following enabled under the interface?
Under Administrative Access, select Security Fabric Connection.
You can also do a sniffer on FGT to check if any capwap traffic is making it to the FGT.
diag sniffer packet any 'port 5246' 4 0 a
Thank you.
Shahan
Hi,
The Security Fabric Connecion in enabled, while the diag sniffer packet any 'port 5246' 4 0 a return
: FortiGate-80F # diag sniffer packet any 'port 5246' 4 0 a
interfaces=[any]
filters=[port 5246]
^C
0 packets received by filter
0 packets dropped by kern
OK!!
I disabled the Secuity Fabric Connection , rebooted the FGT and reenabled the SFC and it works!!!!!!
Thanks to ALL
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1518 | |
1018 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.