I am needing help because the Fortigate 80F v6.4.6 build6083 does not detect two FAP-223E.
I had already setup another installation time ago with the same Firewall ,firmware and access point without any kind of issue.
Thanks in advance
Try resetting the FAP-223E devices first and see if it works after that. This should be done using the reset option available physically on the device.
I had already try the hard reset but it does not works.
The strange is that the dhcp server (Fortigate 80F) assign the IP to the 2 FAPs , but in "Managed FortiAPs" there is nothing.
Do you have following enabled under the interface?
Under Administrative Access, select Security Fabric Connection.
You can also do a sniffer on FGT to check if any capwap traffic is making it to the FGT.
diag sniffer packet any 'port 5246' 4 0 a
The Security Fabric Connecion in enabled, while the diag sniffer packet any 'port 5246' 4 0 a return
: FortiGate-80F # diag sniffer packet any 'port 5246' 4 0 ainterfaces=[any]filters=[port 5246]^C0 packets received by filter0 packets dropped by kern
I disabled the Secuity Fabric Connection , rebooted the FGT and reenabled the SFC and it works!!!!!!
Thanks to ALL
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2023 Fortinet, Inc. All Rights Reserved.