Fortigate80F FAP223E

[itmaint]

Hello,

I am needing help because the Fortigate 80F v6.4.6 build6083 does not detect  two FAP-223E.

I  had already setup another installation time ago with the same Firewall ,firmware and  access point without any kind of issue.

 Thanks in advance

[sagha]

Hi itmaint, 

Try resetting the FAP-223E devices first and see if it works after that. This should be done using the reset option available physically on the device. 

Thank you. 

Shahan Agha

[itmaint]

Thanks Sagha,

I had already try the hard reset but it does not works.

[itmaint]

The strange is that the dhcp server (Fortigate 80F) assign the IP to the 2 FAPs , but in "Managed FortiAPs" there is nothing. 

[sagha]

Hi itmaint, 

Do you have following enabled under the interface? 

Under Administrative Access, select Security Fabric Connection.

You can also do a sniffer on FGT to check if any capwap traffic is making it to the FGT. 

diag sniffer packet any 'port 5246' 4 0 a

Thank you.

Shahan

[itmaint]

Hi,

The Security Fabric Connecion in enabled, while the diag sniffer packet any 'port 5246' 4 0 a  return

: FortiGate-80F # diag sniffer packet any 'port 5246' 4 0 a
interfaces=[any]
filters=[port 5246]
^C
0 packets received by filter
0 packets dropped by kern

[itmaint]

OK!!

I disabled the Secuity Fabric Connection , rebooted the FGT and reenabled the SFC and it works!!!!!!

Thanks to ALL