Hi All,
I'm using Fortigate80E v6.0.9 build0335. We have two different internet connection. One is radiolink and second one is VDSL. I've already setup VDSL modem as bridge and on fortigate i choose pppoe and wrote down username and password. when i enable VDSL in interfaces; my connection is lost. i want to use both wan connection and i'll set policy like clients would use wan1 (radiolink) and servers use wan2(vdsl). I searched forum and couldn't find the answer. Can you help me?
Thanks
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi,
Please check the admin distance of pppoe interface,it is by default set at 5, you may want to change it to 10 to match that of vdsl. or Alternately, use admin distance of 5 for the static/default routes across radiolink to match that with pppoe.
best regards,
Jin
Hi,
Please check the admin distance of pppoe interface,it is by default set at 5, you may want to change it to 10 to match that of vdsl. or Alternately, use admin distance of 5 for the static/default routes across radiolink to match that with pppoe.
best regards,
Jin
Hi,
When i changed distance to 10, vdsl worked. and i changed some clients to vdsl. some of them got connection problems. in the end i get implicit deny error. i'm trying to figure it out
Hi,
Implicit deny error may be because we needed policies to be created from Lan to vdsl as that created for Lan to RadioLink.
best regards,
Jin
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1696 | |
1092 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.