Hi All.,
for example, these are my network details (dummy) :
Wan IP : 1.2.3.4
Lan IP : 202.12.22.12 - 202.12.22.28 (these are my public) one of whichis our email server.
My email server is connected to one of the Lan port (202.12.22.15). How can i make the default outgoing ip to be the same as the mail server ip address?
Because right now, every time the user sends an email message, the ip address that is being captured at the email header is my Wan IP (1.2.3.4). The problem here is that, whenever our wan ip gets blacklisted, in will blacklist all domains connected to it.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
You may try disable "NAT" on policy "LAN-->Wan", if LAN's ip is real public IP.
Thanks,
is my setup safe / advisable? or should i be using the DMZ or create a DMZ Vlan network from the interface?
With NAT enable, it is more safe. Thanks.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1502 | |
1011 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.