My Fortigate environment for wifi guest user is a external authentication portal by FortiAuthentication; i replace the Fortinet certicate SSL with my own CA ( Sectigo ) to avoid warning certificate from browser.
The workflow begin with the external page of FortiAth " https://fac.xxzxzxzxx.YY/portal"; authentication is processed by Fortiauth but the browser goes redirect at internal page in this url "10.12.0.1:1000/fortiauth.... " without also the HTTPS form... This is the IP internal interface of Fortigate for the specific SSID. The browser warning that it's insecure because it's not in HTTPS and show the warning to trasmit the credential in a non secure channel...
How do I avoid this warning and continue the protected session?
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
OK guys I solved !
I configured a entry in my DNS server and all is going OK. But it's strange because if i worked with hosts file the resolution didn't work...
Thank you all
Fabio
This is the capture Packet when Apple device tries to connect to wifi and the Fortigate replies with 303 redirect not to FAC but to FGT itself.. it's strage ..
The address portal it's fac.XXXYYY.ZZ and not falcon.XXXXXX.it ( the Fortigate ) ..
GET /hotspot-detect.html HTTP/1.0
Host: captive.apple.com
Connection: close
User-Agent: CaptiveNetworkSupport-428.0.0.0.1 wispr
HTTP/1.1 303 See Other
Location: https://falcon.XXXXXX.it:1003/fgtauth?02062921c99fa5fd
Connection: close
Content-Length: 231
Cache-Control: no-cache
Content-Type: text/html
X-Frame-Options: SAMEORIGIN
"<html><head><title>Firewall Authentication</title></head><body>Redirected to the secure channel.<a href="https://falcon.notartel.it:1003/fgtauth?02062921c99fa5fd">Click here</a> to load the secure authentication page.</body></html>"
Hey Fabio,
here is a copy and paste from the 6.4 captive portal flow ( GUI > Authentication > Portals > Policies > Upper right there is the blue question mark) - that should explain how the redirect works:
The typical captive portal workflow for an end-user with a FortiGate/FortiWiFi goes as follows:
What exactly is your redirect link on the FortiGate? You could crosscheck if the link has a / appended to it. It should be similar to "https://[FAC IP/FQDN]/portal/". If that / is missing the iOS may fail as we've seen the iPhone might not handle the HTTP response code 301 from the FortiAuthenticator webserver later.
Best regards,
Markus
Hi Markus,
I have some issue in the step 7 (from typical captive portal workflow) that I create a new account, receive a confirmation on the website that is ok, but after this the website don´t redirect automatically to the credential login to put the user/pass created.
what can I check why is not open the credential login?
I force to appear it, but if I enter in a site as www.google.com I receive a message about HSTS, if I enter in another one with no HSTS the credential login page appear and I can login.
hello Markus,
thank you for you patience :)
but my problems is before point 1 ... the rest is ok
After i click to my Wifi guest .. the normal scenario is show automatical browser page; in windows load the complete browser.. in Apple device load a WEBVIEW a minibrowser..
and the issue happened when I change the auth-portal setting on FGT linke this:
config firewall auth-portal
set portal-addr "falcon.XXXXXX.it"
end
When I setup this in Windows enviroment the page authentication still appear, but in Apple devices ( Mac, iPhone, iPad .. ) no longer appears.
If I unset the portal-addr the redirect to FAC goes ok " https://fac.XXXXXXX.it/portal
OK guys I solved !
I configured a entry in my DNS server and all is going OK. But it's strange because if i worked with hosts file the resolution didn't work...
Thank you all
Fabio
Hi Fabio,
good to hear that. The hosts file should always work, unless the format might be wrong.
Example:
192.168.112.1 vpn.forti.lab vpn
Best regards,
Markus
Created on 03-31-2022 11:54 PM Edited on 03-31-2022 11:55 PM
why you put a space between vpn.forti.lab and vpn ?
it's a error with keyboard ?
Fabio
Hey Fabio,
that DNS entry contains the IP, the full domain name, and the shortened hostname (vpn) without DNS suffix (forti.lab) - this could also be an alias for example, or a different domain that also resolves to the same IP.
-> DNS entries in the host file contain one IP and one or more names.
In this case, it would allow the client to reach the IP at 'vpn.forti.lab' or just 'vpn'.
Cheers!
Sorry to thread necro, but I wanted to know if this is the standard way of having a captive portal for external guests that does not prompt them to submit information? Asking because this workflow is somewhat broken in the latest release, and I wish to understand if a bug is currently preventing me from configuring a best practice implementation.
What version do you have installed?
For the FGT I have version 6.4.10 and for the FortiAth I have 6.4.0
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1688 | |
1087 | |
752 | |
446 | |
227 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.