Fortigate sees incorrect bandwidth on outbound

[samon]

i have fortigate v 7.4.3  and i see that i use high outbound bandwith and this is not correct their is no one use this value   does it related to update my fortigate

[HarryTran]

Hi @samon 

To understand the issue better, could you please share more details? For example:
– A screenshot of Dashboard → Network → Interfaces showing the high outbound bandwidth
– The model of your FortiGate and if you are using traffic shaping, SD-WAN, or VPN
– When this started happening (right after the upgrade to 7.4.3 or later?)

With these details it will be easier to see if it’s just a display issue or real traffic.

Regards,

Harry

[filhalbate]

I'm not sure what anyone else's experience is but I've never had good luck with bandwidth in fortiview. At least not in the interface as a whole. I've always had it show inaccurately, sometimes showing the bandwidths in the TB level. I rely more on the interface widgets for bandwidth usage, or I look at the the individual application or source via the drill down. I also noticed it appears Fortiview in FAZ is more accurate, even when the box itself isn't. Not really sure why.