Hi All,
I have 2 Fortigate firewalls located in two geographical locations - version 5.2.10.
Between these firewalls I have created virtual clustering.
Each firewall will have 4 vdoms. 2 Vdoms will be active in one firewall and the other 2 will be active in the other firewall.
Virtual Cluster 1
VDoms DC1,root
FW-DC1 <> MASTER 132 EDIT
FW-DC2 <> SLAVE 128 EDIT
VDoms DC2,root-dc2
FW-DC1 <> SLAVE 128
FW-DC2 <> MASTER 132
set vcluster2 enable set override enable config secondary-vcluster set override enable set priority 132 set vdom "DC2" "root-dc2" end
As the Failover test was never done earlier, I am planning to test the failover between these two devices/vdoms.
Please let me know how to do this in GUI as well as in CLI. And what simple tests needs to be carried out during the test, apart from pinging to the devices.
Regards
Rajesh
User | Count |
---|---|
2546 | |
1354 | |
795 | |
643 | |
455 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.