Hello everyone. In our infrastructure, we have a Fortigate 100f. Situation: we are replacing our main switches. I have attached an image for you to see the changes. Basically, we want to remove core-1 and core-2 switches and will keep core-3 and core-4. Currently, everything has been migrated except for VLAN 1, where the firewall and the network communications of the switches are located. The only change I really see here is in MAC addresses since we are configuring the VRRP group in the new cores. That said, when we move VLAN 1 to cores 3 and 4 to finally shut down cores 1 and 2, everything works perfectly except for the services we have in the DMZ of our Fortigate. The question I have is, what could be changing if currently everything is working including the DMZ, and when we make the switch, everything works except the Fortigate's DMZ. Basically, the behavior of the Fortigate is that it sends the traffic, which it is currently correctly sending to the LAN, to another interface or towards the internet. I would appreciate some help on this, and if you need more details, please do not hesitate to ask.
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
"Basically, the behavior of the Fortigate is that it sends the traffic, which it is currently correctly sending to the LAN, to another interface or towards the internet."
>> routing issue. Check the routing table related to the destination IP:
get router info routing table all
get router info routing table detail DES.TIN.ATION.IP
"Basically, the behavior of the Fortigate is that it sends the traffic, which it is currently correctly sending to the LAN, to another interface or towards the internet."
>> routing issue. Check the routing table related to the destination IP:
get router info routing table all
get router info routing table detail DES.TIN.ATION.IP
I understand, but the problem is that we are not making any changes to the routes. The routes have already been moved and are working correctly. Today at 17:00 we will make another attempt. Could you suggest a command to diagnose what the problem might be? In any case, I will also check the routing tables. Thank you.
I can only think about the directly connected routes. If the subnet does not appear as directly connected anymore, then FortiGate will use the default route out (wan).
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1712 | |
1093 | |
752 | |
447 | |
231 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.