I want to check the current sttatic of disk-usage in fortigate VM.
My Fortigate Vm running on VMWare have 2 disks: Disk SYSTEM (20.0GiB) and Disk Virtual-Disk(80.0GiB)
I tried the deviceinfo command above, but the static is confuse. How can I check the total disk-usage?
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
@Donglv9
I think we have the solution here.
You have a 80GB HDD but you are using only:
set size 30107 (29.4GB)
In order for you to use the whole HDD you have to change
config system storage
edit "Virtual-Disk"
set size 81920
next
end
After this change you will use all 80 GB and see correct values.
If you have found a solution, please like and accept it to make it easily accessible for others.
Regards!
@xshkurti
@Donglv9
According to this link:
Technical Tip: How to extend disk size for FortiGa... - Fortinet Community
Formating logdisk will make FGT to use the whole space. Havent tried it but other engineers have tested that it works.
Now to format that partition (sdb where sdb1 for log is created) follow this link:
Technical Tip: how to format disk SDA partition to... - Fortinet Community
Please give it a try. And remember to backup it first. (also guide on the second link)
If you have found a solution, please like and accept it to make it easily accessible for others.
Regards!
Please try commands described in this link:
Troubleshooting Tip: How to clear short of flash s... - Fortinet Community
But most probably this will come to help:
# fnsysctl df -h
If you have found a solution, please like and accept it to make it easily accessible for others.
Regards!
@xshkurti
thanks @xshkurti
My total 2 disk space is 100GB (20+80), I curious about my Virtual-Disk(80.0GiB) how many disks space in-used because it not show the total (80Gb) when running "fnsysctl df -h"
Or can any command show how many disks space was used in 100GB allocated?
@Donglv9
What is the output of fnsysctl df -h?
@Donglv9
What about below command output?
exe disk list
show system storage
Created on 10-02-2023 02:51 AM Edited on 10-02-2023 02:54 AM
@xshkurti
It doesn't show the used percentage of the 80Gb disk.
@Donglv9
I think we have the solution here.
You have a 80GB HDD but you are using only:
set size 30107 (29.4GB)
In order for you to use the whole HDD you have to change
config system storage
edit "Virtual-Disk"
set size 81920
next
end
After this change you will use all 80 GB and see correct values.
If you have found a solution, please like and accept it to make it easily accessible for others.
Regards!
@xshkurti
@xshkurti
I see the problem!
But can I set the size 30Gb to 80Gb on Fortigate, can you show me?
There is no command to set the size to 81920 as your comment above.
@Donglv9
According to this link:
Technical Tip: How to extend disk size for FortiGa... - Fortinet Community
Formating logdisk will make FGT to use the whole space. Havent tried it but other engineers have tested that it works.
Now to format that partition (sdb where sdb1 for log is created) follow this link:
Technical Tip: how to format disk SDA partition to... - Fortinet Community
Please give it a try. And remember to backup it first. (also guide on the second link)
If you have found a solution, please like and accept it to make it easily accessible for others.
Regards!
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1558 | |
1034 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.