Fortigate HA sync

[DanieleS99]

Hi,

which are the parts of the configuration that the fortigate does not synchronize in the HA Active-Passive?

for example, are the ip of the interfaces synchronized?

Thanks

[kgeorge · Accepted solution]

Hello Daniele,

Greetings!

Please refer this article below to understand what and what does not sync between devices configured in HA Cluster, 

https://community.fortinet.com/t5/FortiGate/Technical-Tip-HA-FortiGate-configurations-that-will-sync...

Have a nice day.

Cheers.

[alif]

Hello @DanieleS99 

The following settings are not synchronized between cluster units:

- The FortiGate host name
- GUI Dashboard widgets
- HA override
- HA device priority
- The virtual cluster priority
- The HA priority setting for a ping server (or dead gateway detection) configuration
- The system interface settings of the HA reserved management interface
- The HA default route for the reserved management interface, set using the ha-mgmt-interface-gateway option of the config system ha command

Please refer to the below link for details.
https://docs.fortinet.com/document/fortigate/7.0.5/administration-guide/62403/fgcp