Hello,
Please check the configuration for local users on both the FGTs in cluster.
Command 'show user local' should highlight the config.
Please compare both and see if the config matches or not.
Thanks and regards,
Shahan Agha
Hello,
Please check the configuration for local users on both the FGTs in cluster.
Command 'show user local' should highlight the config.
Please compare both and see if the config matches or not.
Thanks and regards,
Shahan Agha
Hi,
You can try to re-calculate checksum and see if it helps:
#diagnose sys ha checksum recalculate
Otherwise you can refer following :
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Procedure-for-HA-manual-synchronization/ta...
#diag sys ha checksum cluster
Excelente, soluciono un problema que tenia! Gracias
User | Count |
---|---|
2035 | |
1163 | |
770 | |
448 | |
327 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.