- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Fortigate-HA Update FortiGuard via Mgmt port
Hai Guys
I am planning to update FortiGuard via Mgmt port, is that possible?
I use HA, the configuration is as follows:
Fortigate 401E Versi 6.4.6
Fortigate-01 (Master)
config system ha
set ha-mgmt-status enable
config ha-mgmt-interfaces
edit 1
set interface "mgmt"
set gateway 192.168.5.1
Config system interface
edit "mgmt"
set vdom "root"
set ip 192.168.5.50 255.255.255.0
set allowaccess ping https ssh fgfm
set type physical
config system dns
set primary 8.8.8.8
set secondary 8.8.4.4
Fortigate-02 (Slave)
Config system interface
edit "mgmt"
set vdom "root"
set ip 192.168.5.51 255.255.255.0
set allowaccess ping https ssh fgfm
set type physical
I can ping 8.8.8.8 but ping to google unresolve hostname.
is there something wrong with my configuration?
Thank You
- Labels:
-
FortiGate
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Haryadi,
Thank you for using the Community Forum.
I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.
Regards,
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Haryadi,
I have found this document:
Could you please tell me if it helps?
Regards,
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @haryadi_sentoso1 ,
Give internet access after HA management port (mgmt), enable ha-direct in HA configuration and it is done. Please check the articles below:
Best Regards,
Vasil
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
"set ha-direct enable",can update FortiGuard via Mgmt port?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You can change the configuration on HA settings, and add a management interface for HA then FortiGuard traffic will go through that interface.
Do not forget that you need to know that from the management subnet we need to reach the internet.
Best Regards,
Vasil
