Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
mnovelli
Staff
Staff

#Fortigate Explicit Proxy Routing

Hi I configured an Explicit Proxy on a Fortigate appliance. Fortigate use FSSO for remote users authentication and it has tree main interfaces: 1 LAN interface on which explicit proxy is configured and 2 WAN interface. My goal is that User A proxed traffic flow through WAN1 interface and User B proxed traffic flow through WAN2. I know that it's not possible use PBR and my customer doesn't want use an additional vdom to re-route traffic generated by Proxy. Is there another solution to achieve it? 

 

1 Solution
Debbie_FTNT
Staff
Staff

You could probably do some kind of SD-WAN setup?

-> proxy policy uses SD-Wan interface

-> SDWAN rules load-balance the traffic according to customer's desired setup

+++ Divide by Cucumber Error. Please Reinstall Universe and Reboot +++

View solution in original post

3 REPLIES 3
aahmadzada
Staff
Staff

Hi, In the proxy policy, you can select the outgoing interface.

 

 

https://docs.fortinet.com/document/fortigate/7.4.1/administration-guide/300428/explicit-web-proxy

 

 

Ahmad

Ahmad
Debbie_FTNT
Staff
Staff

You could probably do some kind of SD-WAN setup?

-> proxy policy uses SD-Wan interface

-> SDWAN rules load-balance the traffic according to customer's desired setup

+++ Divide by Cucumber Error. Please Reinstall Universe and Reboot +++
mnovelli

Thank you very much. SD-WAN solve it.

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors