Fortigate Error - No disks available

[lequangrin]

Fortigate 200B error - No disks available

Dear All, - I have a Firewall 200B after update firmware from version 5.0.0 to 5.2.9, Now it has problem is No disks available and CPU Always run 100%, My firewall don't use hard disk, I don't know why after update it's don't save log in Flash.  Please help me, How to fix it. Thank All   FTG200B # get sys status Version: FortiGate-200B v5.2.9,build0736,160906 (GA) Virus-DB: 45.00195(2017-03-06 03:11) Extended DB: 1.00000(2012-10-17 15:46) IPS-DB: 10.00081(2017-03-04 23:59) IPS-ETDB: 0.00000(2001-01-01 00:00) Botnet DB: 3.00327(2017-03-06 10:06) BIOS version: 04000010 System Part-Number: P05625-02 Log hard disk: Not available Internal Switch mode: switch Hostname: HQ-FTG200B-01   ----------------------------------------   FTG200B # get hardware status Model name: FortiGate-200B ASIC version: CP6 ASIC SRAM: 64M CPU: Celeron (Covington) Number of CPUs: 1 RAM: 1005 MB Compact Flash: 3838 MB /dev/sda Hard disk: not available USB Flash: not available Network Card chipset: mvl_sw Ethernet driver1.0 (rev.) Operation Mode: NAT Current virtual domain: root Max number of virtual domains: 10 Virtual domains status: 1 in NAT mode, 0 in TP mode Virtual domain configuration: disable FIPS-CC mode: disable Current HA mode: standalone Branch point: 736 Release Version Information: GA System time: Tue Mar  7 17:21:11 2017   -----------------------------------   FTG200B# diagnose hardware deviceinfo disk   Disk USB-2(boot)     ref:       3.7GB    type: USB [FORTINET FG200B_FWV071610] dev: /dev/sda   partition ref:      61.0MB,  27.0MB free  mounted: Y  label:  dev: /dev/sda1(boot) start: 1   partition ref:      62.0MB,  32.0MB free  mounted: N  label:  dev: /dev/sda2(boot) start: 131073   partition ref:   3   3.5GB,   3.5GB free  mounted: Y  label:  dev: /dev/sda3 start: 262145 ---------------------------------------------------   FTG200B # diagnose hardware deviceinfo flash  Mapping boot device /dev/sda to /dev/sg0 Checking spareblock on /dev/sg0... SCSI Status: Good Plane No        Spare Block Counts 1            99 2            97 Attached devices: Host: scsi2 Channel: 00 Id: 00 Lun: 00  Htid: usb-storage-0 Vendor: FORTINET Model: FG200B_FWV071610 Rev: 1610 Type:   Direct-Access                    ANSI SCSI revision: 02

[ede_pfau]

hi,

didn't you post this before...no response usually means 'no idea' and reposting won't help much.

Anyways, there's been changes to logging to disk in v5.2. Please check the 'What's New' docs. Basically, you can either have logging to disk or WAN optimization, not both. And logging to flash (which is not meant by 'disk' anymore) is disencouraged in the wake of the many FGTs which failed from flash wear.