Fortigate EMS Fabric Connector Monitoring with SNMP

[lorky]

Hi Team,

We have several Fortigates connected to EMS via Fabric Connector. Sometimes we have troubles with the Fabric Connector and the Connector goes down.

We also have a good SNMP Monitoring Tool called PRTG Network Monitor which monitors already a lot in my environment.

Question: Is it possible to monitor state of Fabric Connector Status via SNMP Tool directly on Fortigate. Which SNMP OID is used for connector 1?

If SNMP is not available, are there any possibilities over API?

Kind regards

[smaruvala]

Hi,

For EMS you can try the OID of ".1.3.6.1.4.1.12356.101.27.2.1.1.4".

Regards,

Shiva

[Ylli_Seitaj]

Hello,

Please be informed that you need to upgrade the FortiOS to 7.4.2, in order to have the possibility to monitor the EMS connection status.

Best Regards,
Ylli

[Ylli_Seitaj]

Hello,

Please follow below KB, if you need help to find the OID, to monitor the EMS connection status:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-The-correct-OID-to-monitor-each-interface-...

Best Regards,
Ylli