Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
lorky
New Contributor

Fortigate EMS Fabric Connector Monitoring with SNMP

Hi Team,

We have several Fortigates connected to EMS via Fabric Connector. Sometimes we have troubles with the Fabric Connector and the Connector goes down.

We also have a good SNMP Monitoring Tool called PRTG Network Monitor which monitors already a lot in my environment.

Question: Is it possible to monitor state of Fabric Connector Status via SNMP Tool directly on Fortigate. Which SNMP OID is used for connector 1?

If SNMP is not available, are there any possibilities over API?

Kind regards

10.0.0.0.1 192.168.1.254
3 REPLIES 3
smaruvala
Staff
Staff

Hi,

 

For EMS you can try the OID of ".1.3.6.1.4.1.12356.101.27.2.1.1.4".

 

Regards,

Shiva

Ylli_Seitaj
Staff
Staff

Hello,

Please be informed that you need to upgrade the FortiOS to 7.4.2, in order to have the possibility to monitor the EMS connection status.

 

Best Regards,
Ylli

Ylli_Seitaj
Staff
Staff

Hello,

Please follow below KB, if you need help to find the OID, to monitor the EMS connection status:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-The-correct-OID-to-monitor-each-interface-...

 

Best Regards,
Ylli

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors