Fortigate Automation Stitch - Webhook - Microsoft Teams

[doesterhuizen]

Hi All

We are looking at utilizing the Webhook Stitch to send alerts to us, we have come accross a cookbook for setting up Slack, we however use teams.

Has anyone used the Webhook automation stitch to send notifications to MS teams channel?

Thanks

[doesterhuizen]

Anyone have an idea around this?

[neonbit · Accepted solution]

Just tested it now and it works.

https://ibb.co/T8nJqFb

https://ibb.co/hV6MLCb

[doesterhuizen]

Hi

Thanks, I will give it a test and let you know how it goes.

Cheers

[doesterhuizen]

Doesn't seem to be working

We have setup an email alert to be sent to the channel when someone logs in and that works

When we add webhook action i do not get the post for the webhook on a post for the email.

My config attached

[neonbit]

That's weird.

I'd recommend you test it via curl first to ensure that everything is fine.

You can goto https://curlbuilder.com/ and fill in like I have in the pic below.

https://ibb.co/n7hpy0D

Just tested this using curl and was able to send message.

If that works then it's probably something on the FortiGate. You can use the debug commands from this KB to find out what's going on:

https://kb.fortinet.com/kb/documentLink.do?externalID=FD46639

[Jordan_Thompson_FTNT]

Hi all,

A docs article has been created to describe how to setup Automation with Microsoft Teams: https://docs.fortinet.com/document/fortigate/6.4.0/administration-guide/910350/microsoft-teams-integ....

Jordan