Currently I'm running the Fortigate Firewall 90D as internet gateway, it's covering about 25 users to internet. I have a concern regarding the CPU usage. There is 99% utilization. I used the command "diag sys top" and I got the result as below. The process "src-vis" using almost 48,2%. I have tried to disable the disk log setting. But it still high. Do you have any ideas?
src-vis 88 R 48.2 0.9
netscan 899 R 47.7 1.7
ipsengine 122 S < 1.4 2.0
newcli 902 R 0.9 0.9
ipshelper 87 S < 0.0 1.9
pyfcgid 118 S 0.0 1.7
cmdbsvr 37 S 0.0 1.7
miglogd 112 S 0.0 1.7
pyfcgid 59 S 0.0 1.6
pyfcgid 117 S 0.0 1.6
pyfcgid 116 S 0.0 1.6
miglogd 53 S 0.0 1.5
httpsd 135 S 0.0 1.5
httpsd 136 S 0.0 1.4
sslvpnd 77 S 0.0 1.3
cw_acd 107 S 0.0 1.3
httpsd 900 S 0.0 1.3
httpsd 58 S 0.0 1.3
httpsd 134 S 0.0 1.2
forticron 71 S 0.0 1.1
Hello,
You may consider to disable device identification under interfaces in order to decrease CPU usage.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.