Fortigate 80C - specific WAN to specific interface

[johnatan_doe]

Hi, hope this is on the proper place. 

I have 4 different internet providers configured on my Forti ( WAN1, WAN2, internal 5 and 6 )

Internal 3 is configured as WI FI with 10.1.1.1 address.

How can I set that only people who are going through this internal interface 3 have e.g. internet provider X?

Is it in Router->Static->Policy Route

Incoming: interface 3

Outgoing: internal 5

Source: 10.1.1.0/255.255.255.0

Destination: 0.0.0.0 / 0.0.0.0

[Carl_Wallmark]

Hi,

Yes, thats a good way of doing it. Dont forget firewall policys as well.

[amitkor]

Dont forget to check the default gateway for that WAN link and configure it in the policy route :)