Fortigate 60D ISP speed limit

[hanifannuman]

i just want to check i have upgrade the ISP line 800 download 200 upload
when i do speed test internal network i get 110 download 110 upload
but when direct ISP router i get 700++ download 150++ upload
this is becuase the fortgate 60D box limit or setting?

[Anonymous]

Hello, 

Thank you for using Fortinet Community. This could happen if a limit is configured on the interface. Please refer this article: Technical Tip: Interface bandwidth limit. 

Please let me know if this helps.

[hanifannuman]

Hi Irfan,

if the  traffic shaping setting already enable "Max Bandwidth" should be it will auto right?

Thank You,

hanif 

[Anonymous]

Hello,
By default, if traffic shaping is enabled, the bandwidth will be distributed evenly to all policies using it. You can enable per policy shaping to apply shaping individually to each policy.

Please refer to this document (change the version if needed) for more information: Limiting bandwidth with traffic shaping

[hanifannuman]

Hi Irfan,

my shaping policy already set enable Max bandwidth : 1048576 / disable Guaranteed & select policy i want to apply, but the problem still same.

Thank You,

hanif

[sjoshi]

Dear hanifannuman,

Thank you for posting to the Fortinet Community Forum.

As per your description you are facing speed issue in 60D.

Please answer some of my query:-
> Are you using any traffic shaping?
> Have you tested creating a test policy for one of the user without any UTM profile?
> Please check by changing the DNS to 8.8.8.8.

Please perform the ipref test and share me the output.
Please find the link for your reference
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-perform-bandwidth-tests/ta-p/197784

Please share the following output:-
diagnose hardware deviceinfo nic <interface_name>
nsysctl ifconfig <interface_name>
get sys performance status

Let us know if this helps.

Thanks

[hanifannuman]

Hi Salon Raj Joshi,

Below is my reply

> Are you using any traffic shaping?

Yes
> Have you tested creating a test policy for one of the user without any UTM profile?

already test but the problem still same
> Please check by changing the DNS to 8.8.8.8.

already try but the problem still same

to do perform the ipref test i not much understand the step with one i really need to do

u have any easy way to check?

Thank You,

Hanif

[yfxwj]

Hello,

     Did you use the FGT 60D  with  ISP  PPPOE model?

Then speed test internal network.   I think FGT60D  no support  PPPOE not good.

[hanifannuman]

Hi, 

Yes, i use FTG 60D with ISP PPPOE

[aahmadzada]

PPPoE is handled by PPP software process and connections are terminated in virtual interfaces. Therefore PPPoE connection cannot be offloaded to the hardware and can`t be accelerated.

Ask your ISP to switch from PPPoE to DHCP or static IP address assignment and you should see a slight improvement in the throughput.

Ahmad