Hello everyone,
New to FortiGate firewalls, quick question. I'm bringing in a new fiber connection to our Corp office and I want all our VOIP/SIP traffic to use this new connection but all other internet traffic to go out our existing connection. What would be the best way to achieve this? Thanks,
Pat
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi,
You may use policy routes to route UDP traffic with destination port 5060 through the new gateway. Please see http://kb.fortinet.com/kb/microsites/search.do?cmd=displayKC&docType=kc&externalId=100116
You may use protocol number 17 for UDP. BTW, the policy route config in 5.0 is more or less the same
FYI 5060 only covers "clear text" sip
Encrypted sip needs 5061 (UDP, but TCP is reserved aswell) aswell
and this is only if (s)he actually uses SIP (which (s)he appearently does)
If (s)he uses Cisco phones it's sccp on tcp2000 and SCCPS on 2443
I looked at Policy Based but there isn't a Protocol Number for SIP. The documentation you sent me was for v3 and v4, I am running v5.0.12. Thanks, Pat
OK, sounds good! Thanks!
Pat
The KB article listed earlier does indeed apply to 5.0 & 5.2. It has been updated to reflect this, and the screen captures now show the current GUI.
Regards,
Admin
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1558 | |
1033 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.