Fortigate 60D (FortiOS 5.0.12)

[phowardmhm]

Hello everyone,

        New to FortiGate firewalls, quick question.  I'm bringing in a new fiber connection to our Corp office and I want all our VOIP/SIP traffic to use this new connection but all other internet traffic to go out our existing connection.  What would be the best way to achieve this?  Thanks,

Pat

[jintrah_FTNT]

Hi,

You may use policy routes to route UDP traffic with destination port 5060 through the new gateway. Please see http://kb.fortinet.com/kb/microsites/search.do?cmd=displayKC&docType=kc&externalId=100116

[jintrah_FTNT]

You may use protocol number 17 for UDP. BTW, the policy route config in 5.0 is more or less the same

[gschmitt]

FYI 5060 only covers "clear text" sip

Encrypted sip needs 5061 (UDP, but TCP is reserved aswell) aswell

and this is only if (s)he actually uses SIP (which (s)he appearently does)

If (s)he uses Cisco phones it's sccp on tcp2000 and SCCPS on 2443

[phowardmhm]

I looked at Policy Based but there isn't a Protocol Number for SIP.  The documentation you sent me was for v3 and v4, I am running v5.0.12.  Thanks, Pat

[phowardmhm]

OK, sounds good!  Thanks!

Pat

[Admin_FTNT]

The KB article listed earlier does indeed apply to 5.0 & 5.2.  It has been updated to reflect this, and the screen captures now show the current GUI.

Regards,

Admin