Fortigate 40f wan static ip

[OtAdminGr]

Can i configure wan static ip from my modem ip's ?????

[Shashwati]

Hello

please refer to the document to configure WAN Interface Static IP

https://community.fortinet.com/t5/FortiGate/Technical-Tip-FortiGate-Getting-Started-Configure-Interf...

[johnathan]

It is unclear what you are asking. The FortiGate supports setting a static IP on any interface.
If you are behind an ISP modem and that is giving you a private address, you would probably need to set it to bridged mode and that will give you the correct WAN IP directly on the FortiGate.
Whether or not that will be static depends on your ISP.

[Toshi_Esumi]

Sounds like...you have multiple static IPs from your ISP and currently terminated at the modem/router from the ISP. And, you want to utilize one of them at your 40F behind the modem. Is that what you intended to say?
If so we need to know the subnet mask you got, or multiple public subnets.

Toshi