Fortigate 40c vlan configure using the CLI

[ghorchem]

The lastest firmware no longer supports configureing vlans from the web gui how do you do this using the CLI.

[abelio]

hello, indeed, with 40c you can do that with cli, usual way:

 config system interface
   edit <name>
      set type vlan
      set vlanid <id>
      set vdom <vdomname>
      set ip ...
       ...
    next
 end
 

http://docs.fortinet.com/fgt/handbook/40mr3/fortigate-cli-40-mr3.pdf regards

[bbache99]

If you click on the create new button on the interfaces page there is an option to set VLAN and bind it to an interface? - do you not have that? Running MR3 patch 8