Fortigate 40F as L2TP Client over IPSEC to Portunity VPN ISP

[derMaggus24]

hi guys,

could you please support me with l2tp/ipsec config. 

I would like to set up my forti as l2tp client with portunity vpn isp.

At this point i don't know howto associate the l2tp config. In my example below, i tried to do the config in the tunnel interface.

The phase1-interface works fine. 

edit "portuninty" set vdom "root" set ip [portunity base ipv4] set allowaccess ping https set type tunnel set remote-ip 188.246.0.50 255.255.255.254 set l2tp-client enable set snmp-index 8 set interface "wan"    config l2tp-client-settings      set user "tunnel111111"      set password ENC [password here]      set peer-host "188.246.0.50"      set auth-type chap end next