Fortigate 30D Configuration

KennyG · ‎07-15-2015

Hi Guys,

I need to configure a Fortigate 30D with the configuration steps in the link below (80CM):

I don't need the IPTV feature, just internet. Are the steps straight forward as the link? or do I need CLI to program.

Currently the 30D is not with me, thus I cant test.

Thanks for your help.

Ken

gschmitt · ‎07-15-2015

If you just want the device to grant web access I'd recommend you use the wizard. It will guide you through the most basic steps

gschmitt · ‎07-15-2015

AH ok!

In that case the wizard won't quite suffice I fear, but no worries.

Go to System > Network > Interfaces and select Create New

Enter a Name

Type: VLAN

Interface: the connected physical interface

VLAN ID: 500

Configure the rest as needed

This will appear as a normal interface from now on, simply create an Internal to Name policy allowing traffic

adrianyujs · ‎06-07-2019

Sorry to bring this up, I also need to setup iptv vlan600 as well and I have opened new thread here: https://forum.fortinet.com/tm.aspx?m=174984